Stage 1: Power Infrastructure

• Battery Terminals: Skar SK-BATTERMS1 – $18 – PURCHASED for $18
• KnuKonceptz ANL Fuse Holder x5 – $50 – PURCHASED for $50
• KnuKonceptz 250A Fuse x4 – Included with holder
• KnuKonceptz 300A Fuse – Included with holder
• KnuKonceptz Bassik 3 way Distribution Block – $15 – PURCHASED for $15
• KnuKonceptz 6-Way Ground Block – $28 – PURCHASED for $28
• Marine Bus Bar – $10 – PURCHASED for $7
• 20ft Kolossus 1/0 OFC Red – $125 – PURCHASED for $135
• 10ft Kolossus 1/0 OFC Black – $62.50 – PURCHASED for $67.50
• Copper Lugs – $9 – 0 awg PURCHASED for $6.50
• DJ Setup: DDJ-SR2 with a laptop running Serato – PREVIOUSLY OWNED
• Head Unit: use my current Boss 480BRGB – PREVIOUSLY OWNED
• Fire Extinguisher – $21 – PURCHASED for $21

     Stage 1 Total: $338.50 // Actual Total: $348

Stage 2: Cabin Audio

• Cabin Speakers: 2x Infinity Reference 8632CFX – $80
• Cabin Amplifier: Taramps TS 400×4 – $104
• 2ft KnuKonceptz 10 AWG Red – $1 – PURCHASED for $1
• 2ft KnuKonceptz 10 AWG Black – $1 – PURCHASED for $1
• 35ft KnuKonceptz 14 AWG Translucent Red – $17.50 – PURCHASED for $8
• 35ft KnuKonceptz 14 AWG Black – $17.50 – PURCHASED for $8

     Stage 2 Total: $221.00

Stage 3: Subwoofer

• Sub: Sundown SA-12 v.2 – $410 – v.3 PURCHASED for $365.50
• Sub Amplifier: Skar RP-1500.1D – $208 – PURCHASED for $208
• Skar SK1X12V Ported Enclosure – $110 – Belva 1SV12B PURCHASED for $72
• 3ft D4S 4 AWG Red – $9 – Knukonceptz PURCHASED for $8
• 3ft D4S 4 AWG Black – $9 – Knukonceptz PURCHASED for $8
• 5ft KnuKonceptz 10 AWG Translucent Red – $2.50 – PURCHASED for $2.50
• 5ft KnuKonceptz 10 AWG Black – $2.50 – PURCHASED for $2.50

     Stage 3 Total: $751.00 // Actual Total: $666.50

Stage 4: DSP & Signal Flow

• Taramps Pro 2.8S DSP – $106
• Cable Matters XLR Cable Set – $24 – Neutrik REAN PURCHASED for $17
• 2x Neutrik Female XLR Pass-Through – $20
• 2x Hosa Ground Lift Adapters – $30
• Female XLR to Male RCA Cables – $14
• 12v 40a Relay & Harness – $10
• ATC 14/18 AWG 2a Fuse Holder – $6
• RCA Patch Cables – Included with amps & DSP?
• Marine Bus Bar for REM distribution – NOT INITIALLY INCLUDED – PURCHASED for $7
• 2x 12v Automotive Switch – NOT INITIALLY INCLUDED – PREVIOUSLY OWNED
• 30ft 18 AWG Control Wire – $12 – PREVIOUSLY OWNED

     Stage 4 Total: $222.00

Stage 5: Trunk Lid Array

• Mids: 2x PRV 8MB450-4 v2 – $70
• Highs: 2x PRV D280Ti – $80
• Horns: 2x PRV WGP14-25 – $20
• Trunk Lid Array Amplifier: Taramps DS 800×4 – $145
• 2x Deutsch DT 2-Pin Kit – $14
• Deutsch DT 4-Pin Kit – $12 – PURCHASED for $11
• Braided Loom – $10 – PURCHASED for $9
• 3ft D4S 8 AWG Red – $4 – PURCHASED for $3
• 3ft D4S 8 AWG Black – $4 – PURCHASED for $3
• 40ft KnuKonceptz 14 AWG Translucent Red – $10 – PURCHASED for $9
• 40ft KnuKonceptz 14 AWG Black – $10 – PURCHASED for $9
• MDF for mids box: $50
• Filament for speaker pods: $35 – PURCHASED for $36 (pretty sure I got extra)

     Stage 5 Total: $464

Stage 6: Long-Lasting Power

• Taramps 250A Pro Charger – $572
• PA Performance 200A Alternator – $305
• Secondary Battery: D4S LTO 6.0  – $400
• 2000w Pure Sine Wave Inverter Generator – $266
• NOCO Shore Power Inlet – $23
• Surge Protector – $81
• Various bolts, mounting materials, additional wire, missing pieces, and broken parts – $356.50
• Oscilloscope – PURCHASED for $45
• 17ft Stinger 6000 RCA Cable – PURCHASED for $25
• Dielectric Grease – PURCHASED for $9
• 25ft .75″ Wire Loom – PURCHASED for $21
• Wire Stripper – PURCHASED for $9
• Actual 0g Ring Terminals – PURCHASED for $12
• Wire Ferrules – PURCHASED for $20
• 6-Way Battery Terminals – PURCHASED for $20
• Hydraulic Wire Crimper – PURCHASED for $26
• Junkyard Fuse Box – PURCHASED for $30

Stage 6 Total: $2003.50 // Actual Total: $187

Final Estimated Total: $4000

Actual Running Total: $1353.50